×
Search
Generic filters
Facade lamellas

Facade lamellas

Facade lamellas from the sun – this solution is usually chosen to ensure the building decor, at the same time to protect large glass surfaces from direct sunlight. The angle of the facade lamellas is adjustable (0 ° –120 °), therefore you can choose the desired level of darkening and thus control the amount of natural light entering the building. The lamellas of blinds and roller blinds differ from the facade ones in that they cannot be pulled out and folded.

Facade lamellas can be installed both vertically and horizontally, depending on the design of the building facade. The lamellas are made of extruded aluminium, making the plates extremely light. By using gaskets of different lengths it is possible to adjust the gap between the plates to suit the needs of the user and the weather conditions. This type of window covering can be operated electrically or manually. DEXTERA offers customers a wide choice of colours, therefore the facade lamellas can be easily adapted to any exterior.

“Sunbreaker 300”, rotatable – panels that rotate from 0° to 100° angle, therefore you can choose the desired level of darkening and thus adjust the amount of natural light entering the building. Electric control is used.

“Sunbreaker 300” fixed – you can choose one of the provided plate angles from 30° to 120° (every 15°), protecting horizontal and vertical surfaces. The brackets are installed directly on the base, therefore the distance between the plates can be selected during installation, it does not need to be adjusted in later stages.

“Sunbreaker 210” rotatable – a moving system, the plates of which can be rotated from 0° to 90° angle; it can be installed both horizontally and vertically.
Types of panels: Type A – for horizontal surfaces (roof skylights), special-shaped panels in the closed position for protection against rain and Type B – for covering horizontal and vertical surfaces (building facades, openwork walls).

The Sunbreaker 210 fixed – you can choose one of the default plate angles from 0° to 60° (every 15°). They can be installed both horizontally and vertically, with 210mm wide elliptical profile plates. The brackets are mounted directly on the base, therefore the distance between the plates can be selected during installation, it does not need to be adjusted in later stages.

“Sunbreaker Clip” – the product can be adapted to a wide range due to the offered range of plates as well as quick and easy installation. You can choose one of three plate type systems: “C 115”, “C 160” or “Z 154”. By using gaskets of different lengths it is possible to adjust the gap between the plates to suit everyone’s needs and weather conditions.

Akcijos